wordsfromanneli

Thoughts, ideas, photos, and stories.


22 Comments

Practical Project – Fly Rod Sleeve

When you go fly fishing, sometimes you have to walk through dense brush to get to the lake or river. Carrying a fly rod can be a challenge when shrubbery seems intent on grabbing at the rod and you walk by. If you have your rod ready to go, with the line through the guides and that special fly you tied already attached, you don’t want to get hooked up on every twig as you pass by.

Even if you have a clear launching place for a skiff and you plan to motor to your special spot on the beach some place farther along, what do you do with the rod? You don’t want your expensive Sage rod and your almost equally expensive Islander reel to smack against the aluminum sides of the skiff with every bump of the waves.

Have you ever tried to thread the fly line through the guides on the rod while you’re sitting in a boat? Not so easy. So it’s often better to have the rod ready to go. But then it is so long and unwieldy. Nine or ten feet long is not unusual.

So you separate the parts of the rod after you have it all “threaded” and now you are dealing with half the length. The reel is already fastened onto the end of the rod.

Now all you need is a safe way to carry your ready-to-go rod and reel.

That’s when you want a cloth sleeve to put your fly rod and reel in. I put my amateur sewing skills to work, looked at an old sleeve we had kicking around and made up some sleeves to fit two nine-foot rods and then, feeling encouraged, I made two more that were a bit longer to accommodate the ten-foot rods.

Now the Captain is all set to take the rods to “work.” He’s having so much fun, I may never see him again.

Photo courtesy of Ken Thorne.

If you haven’t checked out my second blog, why not give it a try. I do a lot of writing tips, but there are also stories from time to time. Today’s story is called “A Lousy Story.”

https://annelisplace.wordpress.com/